Published March 2019
Report # SMP-AM-DST-0319

Dental 3D printing has grown to become one of the key focal points of the broader 3D printing industry over the last few years thanks to the potential for additive technologies to provide real production solutions to an industry that is already in the early stages of a total digital revolution. 3D printing technologies are.....

Read More
Published January 2018
Report # SMP-3D-18DENTAL-0118

Hello! Are you reading this in 2019? If you have any questions or you’re interested in this report and its contents, be sure to get in touch with us to find out whether there is a newer version coming soon. Fill out the contact form below with any questions you may have, and we’ll be.....

Read More
Published November 2017
Report # SMP-AM-MD2017-1117

Hello! Are you reading this in 2019? If you have any questions or you’re interested in this report and its contents, be sure to get in touch with us to find out whether there is a newer version coming soon. Fill out the contact form below with any questions you may have, and we’ll be.....

Read More
Published September 2017
Report # SMP-AM-PS2017-0917

3D printing technology has been a major revolution in the field of medicine primarily for its ability to much more effectively and easily create objects of a complex and detailed geometry with no significant additional cost concerns from one object to the next. Combined with medical imaging systems and digital conversion software, 3D printing has.....

Read More
Published August 2017
Report # SMP-AM-CER17-0817

Few materials in the world of manufacturing offer as wide a range of applications opportunities as ceramics. When it comes to additive manufacturing, the wide range of ceramic applications and material types is further expanded by the even wider range of different additive manufacturing processes that have been – and are continuously – researched, validated.....

Read More
Published May 2017
Report # SMP-AO-MI-0517

Hello! Are you reading this in 2019? If you have any questions or you’re interested in this report and its contents, be sure to get in touch with us to find out whether there is a newer version coming soon. Fill out the contact form below with any questions you may have, and we’ll be.....

Read More
Published April 2017
Report # SMP-BPM2017-0417

SmarTech believes that the potential for the bioprinting sector has increased considerably in the past couple of years.  What we are seeing is that (1) bioprinters themselves have technologically matured and (2) they have also become more accessible in terms of cost to a wider target of users — low-cost desktop bioprinters are available at below.....

Read More
Published August 2016
Report # SMP-3D-16DENTAL-0816

The dental industry continues to be one of the strongest targets for development of new 3D printers, materials, and applications. Revenues from additive manufacturing (AM) in the dental sector have grown almost 12 percent since 2015.  Conversely, challenges in the 3D printing industry as a whole were weathered in part thanks to a continuing acceptance.....

Read More
Published August 2015
Report # SMP-3D-MPM-0815

3D-printed prosthetics has often served as the poster boy for 3D printing, with (say) a 3D-printed hand serving to illustrate the wonderful things that can be achieved using 3D printing, however the capabilities of 3D printing in prosthetics are extending beyond just these often highlighted applications today. In this report we forecast the future of.....

Read More
Published August 2015
Report # SMP-3D-MIM-0815

This report explores the revenue potential for 3D printed medical implant markets including a discussion of the latest trends and their commercial implications. Printed implants of standard sizings in hip markets are approaching significant volumes, with more implant types now beginning to reach critical minimum real world trial length to be determined medically successful. SmarTech.....

Read More
0